MAXTENS 1000 TENS Unit (Discontinued)

Features

• 2 Channels
• 3 Modes: Burst, Normal, Modulated Rate
• Treatment Timer: 15, 30 Minutes, or Constant
• Protective See-Through
• Amplitude Cover
• Adjustable Pulse Rate & Width
• LED Channel Indicators
• 1-year warranty
• Comes with 1 pkg of 4 reusable self-adhering electrodes, 1 set 43” pin lead wires, 1 each 9V heavy duty battery, carrying case, and instruction manual
• Leadwire reorder # LW46SPLE
  

• Channel: Dual, isolated between channels.
• Amplitude: Adjustable 0-80 mA peak into 500 ohm load each channel.
• Output Voltage: 0 - 40 V (load: 500 ohm).
• Waveform: Asymmetrical biphasic square pulse .
• Pulse Rate: Adjustable, from 2 - 150 Hz.
• Pulse Width: Adjustable, from 30 - 260 μs.
• Normal Mode:
• Burst Mode:Bursts occur twice per second. Pulse width (adjustable), frequency=100 Hz.
• Modulation Mode:Pulse rate is automatically varied in a cyclic pattern over an interval of nominally 10 seconds (in max 150 Hz). Pulse rate decreases linearly over a period of 4 seconds from the control setting value to a value which is 40% less. The lower pulse rate will continue for 1 second. Then increase linearly over a 4-second period to its original value. The original pulse rate will continue for 1 second. The cycle is then repeated.
• Treatment Timer:15, 30 minutes, or continuous.
• Power Supply: One 9-volt battery (alkaline or nickelcadmium rechargeable).
• Size: 10.5 x 7.0 x 2.4 cm.
• Weight: 127 grams (battery included)